NAPIT-registered electrical contractor • NAPIT’s six-year Work Quality Guarantee applies to qualifying notified work. Terms apply.

NAPIT registered • 6-year guarantee on qualifying notified work.

NAPIT-registered electrical contractor • NAPIT’s six-year Work Quality Guarantee applies to qualifying notified work. Terms apply.

NAPIT registered • 6-year guarantee on qualifying notified work.

NAPIT-registered electrical contractor • NAPIT’s six-year Work Quality Guarantee applies to qualifying notified work. Terms apply.

NAPIT registered • 6-year guarantee on qualifying notified work.

FIRE ALARM TESTING

FOR LANDLORDS, MANAGING AGENTS, HMOs & BUSINESSES

ProfessionalFIRE ALARM Testingand Maintenance

Professional fire alarm testing and maintenance for HMOs, communal areas and commercial premises. We test your system, identify faults and provide a clear digital report within 72 hours.

BOOK FIRE ALARM TESTGET A QUOTE
Qualified
Engineers
Digital
Reports
Fast
Appointment
Fixed
pricing
Trusted Compliance Support For:
Landlords
Estate Agents
HMOs
Commercial Properties
Property Managers
Request a Quote

Understanding The Service

What Is Fire Alarm Testing?

THE INSPECTION

Fire alarm testing checks whether your system operates correctly and helps identify faults. A competent engineer inspects and tests the control panel, detectors, manual call points, sounders, power supplies and batteries, where fitted and within the agreed scope.

Control panel • Detectors • Call points • Sounders
DIGITAL REPORT WITHIN 72 HOURS

YOUR FIRE ALARM TESTING REPORT

You receive a clear digital report recording the system components tested, the results, any faults identified and recommended actions. Repairs or further investigation can be quoted separately.

Test results • Faults • Recommended actions

NOT SURE WHICH FIRE ALARM TEST TO BOOK?

Tell us whether you have domestic smoke alarms or a panel-based system in an HMO, communal building or commercial premises. We will help you choose the correct fire alarm testing service.

Book Fire Alarm TestingSpeak To Our Team

CHOOSE YOUR FIRE ALARM SYSTEM

Book Your Fire Alarm Testing in Minutes

Select the option that matches your property and fire alarm system. Book online or request a quote.

Domestic Fire Alarm Testing

For houses and flats with mains-powered or interlinked smoke and heat alarms.

FROM

£79

INC VAT

Includes up to 3 smoke or heat alarms£20 for each additional alarm

ALL PRICES INCLUDE VAT

  • Smoke and heat alarm testing
  • Interlink and alarm activation checks
  • Power supply and backup checks
  • Faults clearly recorded
  • Digital report within 72 hours
Book Domestic Alarm Test
MOST POPULAR

HMO Fire Alarm Testing

For HMOs and shared accommodation with panel-based or mixed alarm systems.

FROM

£199

INC VAT

Based on the system, number of devices and zones

INCLUDES:

  • Control panel and fault indicators
  • Detectors, call points and sounders
  • Power supplies and standby batteries
  • System logbook reviewed
  • Report within 72 hours
Request an HMO Quote

Commercial Fire Alarm Testing

For offices, shops, schools, warehouses and other non-domestic premises.

CUSTOM QUOTE

Based on devices, zones and system complexity

INCLUDES:

  • Testing completed to an agreed scope
  • Control panel and system devices
  • Power supply and battery checks
  • Faults and recommendations recorded
  • Digital report within 72 hours
Request a Commercial Quote

Fire Alarm Testing Service

What We Check

Our fire alarm testing service checks the main components of your installed system and records the results.

Fire Alarm Checks
01

System Condition

Visual inspection of accessible fire alarm components.

02

Control Panel

Control panel and fault indicators checked, where fitted.

03

Smoke & Heat Detectors

Detectors tested to confirm that they respond correctly.

04

Manual Call Points

Call points tested where they form part of the system.

05

Sounders & Beacons

Alarm sounders, beacons and outputs tested.

06

Power & Batteries

Mains supply and standby batteries checked.

07

Monitoring & Outputs

Alarm transmission checked where connected and arranged.

08

Records & Results

Test results, faults and recommendations recorded.

Book Your Fire Alarm Test
Fire Alarm Testing Responsibilities

Fire Alarm Testing Responsibilities

Under the Regulatory Reform (Fire Safety) Order 2005, the Responsible Person must ensure fire alarm systems and other fire safety equipment are maintained in an efficient state, in efficient working order and in good repair for relevant premises in England and Wales.

Testing and servicing should follow the applicable part of BS 5839, the fire risk assessment, system design and manufacturer’s instructions.

Routine tests, servicing, faults and corrective action should be recorded in the system logbook where applicable.

SERVICE SCHEDULESystem dependent — commonly six-monthly for Grade A and non-domestic systems.

Important: Appointing a competent service provider does not remove the Responsible Person’s legal duties.

UNDERSTANDING YOUR SYSTEM

Fire Alarm Grades and Detection Categories

Grades describe how the system is powered. Categories describe the level of fire detection coverage.

SYSTEM GRADES
PANEL-BASED

GRADE A

PANEL-BASED SYSTEM

A control-panel system with automatic detectors, alarm sounders and manual call points where required.

  • Central control panel
  • Smoke and heat detection
  • Manual call points where required
  • Mains and standby power

GRADE D

MAINS-POWERED ALARMS

Mains-powered, interlinked smoke and heat alarms with standby battery power.

  • Grade D1: sealed standby battery
  • Grade D2: replaceable standby battery
  • Commonly used in homes
  • May be suitable for some HMOs
DETECTION CATEGORIES

LD1

MAXIMUM LIFE PROTECTION

Detection is provided throughout the dwelling in rooms and areas where a fire could start.

  • Escape routes covered
  • Higher-risk rooms covered
  • Wider detection coverage

LD2

ENHANCED LIFE PROTECTION

Detection covers escape routes and specified rooms or areas presenting a higher fire risk.

  • Hallways and landings
  • Staircases
  • Specified higher-risk rooms

LD3

ESCAPE ROUTE PROTECTION

Detection is provided in circulation spaces that form part of the escape route.

  • Hallways
  • Landings
  • Staircases
The required grade and category must be based on the property, fire risk assessment and any licensing requirements.

Understanding Your Report

Fire Alarm Testing Results

Every result indicates how your fire alarm system performed during testing.
Here's what each outcome means for your property and safety.

PASS

System Operational

No Issues Detected

The fire alarm system operated correctly during testing and all devices responded as expected. Your system is working as it should.

Learn more

ADVISORY

Improvement Recommended

Maintenance Suggested

The system is functional, but minor issues or recommendations have been identified to help improve reliability and performance.

Learn more

FAULT

System Defect Found

Repair Required

A fault was identified that affects part of the system. Repairs should be arranged to ensure the system performs correctly.

Learn more

FAIL

Immediate Attention Required

Critical Issue Detected

The fire alarm system failed testing or has defects that could compromise safety. Immediate action is recommended.

Learn more

Your Fire Alarm
Test Includes

Everything covered in your service

  • Manual call point testing
  • Smoke detector testing
  • Heat detector testing
  • Sounder and alarm activation checks
  • Control panel inspection
  • Fault identification
  • Device performance verification
  • Digital testing report
  • Maintenance recommendations
  • Service record documentation

What You Receive

FIRE ALARM TESTING & SERVICING REPORT

On-site inspection & testing

Inspection and testing carried out by a competent service engineer.

System components tested

Control panel, detectors, call points, sounders and power supplies checked.

Faults & observations recorded

Any faults, test results and recommended actions clearly recorded.

Digital report within 72 hours

Clear service report, easy to share and store.

Related Property Compliance Services

Arrange other certificates, safety checks and repairs for the same property.

EICR Certificate

Electrical safety inspection and report for landlords and property owners.

From £59+ VAT

View EICR

Gas Safety Certificate

Annual Gas Safety Certificate and CP12 from a Gas Safe registered engineer.

From £69 inc VAT

View Gas Safety

EPC Certificate

Energy Performance Certificate for letting, selling or managing a property.

From £79 inc VAT

View EPC

PAT Testing

Portable appliance testing for landlords, businesses and managed properties.

From £59 inc VAT

View PAT Testing

Repairs & Remedial Works

Electrical and fire safety remedial works quoted after inspection.

From £75 INC VAT

View Repairs

Need More Than One Compliance Service?

We can arrange your Fire Risk Assessment alongside an EICR, Gas Safety Certificate, Fire Alarm Test, Emergency Lighting Test or PAT Testing.

Build a Compliance Package

Our Process

How Your Fire Alarm Test Works

A simple process from booking to a clear digital service report.

01

Book Your Fire Alarm Test

Tell us about the property and its existing fire alarm system.

  • Book online or request a quote
  • Choose a suitable appointment
  • We confirm access and system details
On-site Visit
02

Inspection & Testing

A competent service engineer checks the accessible components and operation of your fire alarm system.

  • Control panel and alarm devices tested
  • Power supplies and batteries checked
  • Monitoring outputs checked where connected
Within 72 Hours
03

Your Digital Service Report

Receive a clear report with the test results, faults found and recommended actions.

  • Results and observations recorded
  • Issues explained in plain English
  • Easy to share and store

Ready to Book?

Arrange your fire alarm test at a time that suits you.

Book Your Fire Alarm TestSpeak to Our Team

Testing and servicing scope depends on the system type and site requirements.

Frequently Asked Questions

How often should fire alarms be tested?

Many non-domestic fire alarm systems should receive a routine test each week. Professional inspection and servicing is normally required at least every six months. The correct schedule depends on the system, property, fire risk assessment and manufacturer’s instructions.

Is weekly fire alarm testing a legal requirement?

The Regulatory Reform (Fire Safety) Order 2005 does not set a specific weekly interval. It requires the Responsible Person to keep fire safety equipment properly maintained. Weekly testing is recognised guidance for many non-domestic systems and helps show that the alarm is being regularly checked.

Which UK fire alarm testing regulations apply?

Fire safety duties for relevant premises in England and Wales come mainly from the Regulatory Reform (Fire Safety) Order 2005. BS 5839-1:2025 covers non-domestic systems, while BS 5839-6:2019+A1:2020 covers domestic premises. The correct standard depends on the property and system.

Will I receive a fire alarm testing certificate?

You will receive a digital fire alarm service report after the visit. It records the system tested, checks completed, results, faults found and any recommended action. Keep this report with your fire alarm logbook and other fire safety records.

What is the difference between a weekly test and professional servicing?

A weekly test is normally a short check carried out by the person responsible for the premises, often using a different manual call point each week. Professional servicing is more detailed and checks the system, devices, power supplies, faults and other connected equipment.

Do fire alarm tests need to be recorded in a logbook?

Yes. Weekly tests, professional servicing, faults, false alarms and repairs should be recorded. These records help the Responsible Person track the system’s condition and provide evidence that fire safety arrangements are being managed.

What happens if my fire alarm system fails testing?

The report will explain the faults found and any recommended action. Repairs should be arranged promptly, with urgency based on the fault and level of risk. Temporary safety measures may be needed where an important part of the alarm system is unavailable.

Will the fire alarm sound during the test?

Usually, yes. The alarm may sound briefly while devices and outputs are checked. Occupants should be warned beforehand, and any alarm receiving centre should be contacted where applicable. The engineer will aim to keep disruption to a minimum.

AREAS WE COVER

Professional fire risk assessment services for landlords, estate agents and businesses across London, Hertfordshire, Essex, Oxfordshire and Cambridgeshire.

Stylized map of the United Kingdom in dark navy blue, with several glowing neon green location pins scattered across major cities

Fire Risk Assessments in London

Covering North, South, East, West and Central London and surrounding areas.

Fire Risk Assessments in Cambridgeshire

Covering Cambridge, Ely, Newmarket, Huntingdon and surrounding areas.

Fire Risk Assessments in Hertfordshire

Covering Watford, St Albans, Stevenage, Hertford and surrounding areas.

Fire Risk Assessments in Oxfordshire

Covering Oxford, Bicester, Witney, Banbury and surrounding areas.

Fire Risk Assessments in Essex

Covering Chelmsford, Colchester, Brentwood and surrounding areas across Essex.